Item details

Name: MKS GEN V1.4 mother board
Microcontroller: ATmega2560-16AU
Motor driver: A4988
Motor Rated current: Depend on Motor driver
Rated Voltage: 12/24V
Ports for motors: 6 pins XH2.54
Ports for end stops: 3 pins XH2.54
Ports for thermistors: 2 pins XH2.54
Number of heating ports for printing head: 2
Number of heating ports for Heated bed: 1

1. the 2560 and ramps1.4 set on a board, to solve the complex Ramps1.4 combination interface, easy to trouble the problem.
2. can be replaced by motor drive, support 4988 drive and 8825 drive, TMC2100 drive
3. the circuit board uses the high quality 4 board, and has been specially made the heat radiation optimized processing; ramps is 2 laminates.
4. the use of high quality MOSFET tube, the cooling effect is better.
5. the use of dedicated power chip, support 12V-24V power input, to solve the problem of Ramps voltage conversion chip.
6. you can accept the 24V input, the same system power can be reduced to the thermal bed current 1/4, effectively solve the problem of hot bed MOS tube heating.
7. the firmware can use the open source firmware Marlin, configuration and ramps1.4 exactly the same, can be directly replaced by Ramps1.4.
8. can be directly connected to the Ramps1.42004LCD control board and 12864LCD control board.
9. set aside the motor pulse and the direction of the output port, to facilitate the external large current external to connect a large current (such as 5A, 2A) motor drive circuit.
10. keep the Servos on the Ramps1.4, AUX-1, AUX-2 interface, providing 3 5V outputs, 3 12V output interface.


Item including


1 PCS MKS GEN V1.4 Control  Board 

5 PCS A4988 Motor Driver

MKS Gen V1.4 Mother Controller Board With 5pcs A4988

SKU: 101